Cut to length line for transformer lamination

basic information

heat

Product Description

　　CTL series cut to length line for transformer lamination is special equipment for transformer lamination manufacturing.It can punch and shear sheets of all oblique joint cores,including side leg sheets,the yoke and central leg sheets.The silicon steel coil is punched and sheared to be certain shape and size of laminations,then be diverted and tidied for use in stacking.

　　Features:

　　1.Upgraded hydraulic system ensures no oil leakage at decoiler.

　　2.Electrical system uses Siemens products,including PLC,servo system and low voltage apparatus etc.Software program is optimized with addition functions of fault alarm and remote.

　　3.Key parts use excellent quality products,including key bearings,coupling,locknuts and belt etc.

　　4.All guide rail adopts carbide material.Guide rail service life doubles.

　　5.Strictly control parts producing process and parts quality.

　　6.Before ex-works,on load test is strictly followed with the machine,to ensure perfect operation at customer’s site.

　　Composition:

　　1.Doulbe decoiler;2.Sheet guiding device;3.Feeder;4.Punching;5.Shearing unit;6.Discharge table;7.Diverting mechanism;8.Stacking trolley;9.Control cabinet;10.Operating console

　　Technical specifications

Model 　　Parameter	CTL400-22	CTL600-22	CTL900
Width of sheet (mm)	40-440	60-640	100-920
Length of sheet (mm)	300-2500	350-3500	500-5000
Thickness of sheet (mm)	0.20-0.35
Feeding speed (m/min)	0-214	0-214	0-180
Accuracy of cutting length (mm)	±0.1
Cutting burr (mm)	≤0.03
Accuracy of cutting angle	±0.01
Installed power (kW)	36	45	75
Compressed consumption (m³/min)	1.0	1.5	2
Outline dimensions (m)	12x4.9x2.2	15x5.2x2.3	27x12x3.4

The next article

Silicon steel slitting machine